Ducting
We represent Nordfab Quick-Fit Ducting which is one of the world’s largest supplier of clamp-together ducting for dust, mist, fume and smoke collection.
If you are planning to add, remove, or replace dust extraction piping? Quick-Fit Ducting adjustable fittings slide together to create the precise length. No need for time wasted on exact measuring and precision cuts. Simply slide on and fit to your desired length, a few inches or a few feet. Need a different length for a new run? Just re-use your Quick-Fit ducting components and re-fit. |
 |
|
Whether you need just a few parts, or help with a complete system.
Here are a few Quick-Fit Benefits:
- Easy and Fast to Install – Clamps together no rivets screws or welding needed. Cuts installation and down time by more than 45%. Adaptable to your existing ductwork.
- Re-useable – Easy to modify and easy to move as your needs change.
- Easy to Clean-Out – Easy to remove, clean-out and re-install without tools.
- Leak-tight Laser-Welded Seams – Smooth, fully welded seams prevent leaks, snags, and possible “bug harbors”. Available in Galvanized, Aluminum, and Stainless Steel.
|
| |
|
|
Adapts to your every need: connect to the old or bring in the new. Quick-Fit Ducting has everything you need in galvanized or stainless steel parts:
- Laser welded Pipe in diameters from 4” to 24”
- Branch fittings in all sizes and shapes
- Elbows 30°, 40°, 60°, 90°
- Larger custom sizes and special adapters
- Blast Gates, Diverter Valves, Hoods, Manifolds.
|
| |
|
|
| Nordfab is ISO compliant. All ductwork is a clamp- together design using a die-formed, rolled edge, which is then joined together by a single lever clamp of similar material. All clamp together ducting is of continuous laser welded construction along the longitudinal seam of the rolled form duct. All connections shall have a nitrile seal in clamp for standard installs and a Gortex seal for mist or food grade applications. Duct material sheet blanks are five feet long, which is then rolled and fused together with a laser weld process along the longitudinal seam. The ends of the duct are then pressed in a die to form a rolled bead on each end of the duct.
This rolled end is used for clamping components together as well as reinforcement every 5 feet. |
|
 |
| |
|
|
|
Contact us at 714-622-4792
for your FREE ESTIMATE
or
CLICK HERE to contact us by email
|
![AQC Dust collecting systems [Home]](images/AQC.gif){kind=small}
